Original Keyhole Garden Frame

CONTENTS:
12 large metal curves for rails,
8 medium and small metal curves for wedge,
10 T-posts,
40 tap screws,
3/32-inch drill bit,
instructions and planting worksheet

MAJOR COMPONENTS CONSIST OF:

METAL FRAME -- The metal frame is made of EMT conduit, specifically bent into configurations that provide an upper and lower rail separated by vertical posts. The pieces are connected with specially designed PVC tees (provided) which are firmed up with screws (provided).

A power screwdriver is needed to drill in these screws through the PVC and filler and into the metal conduit. A rubber mallet, padded hammer, or board is also needed to tap some of the curved pieces into place. In our experiments, it normally took about 20-30 minutes to piece together.

This part of the unit can be built indoors and then rolled or carried to the garden location. The frame measures approximately six feet in diameter with a wedge (part of the keyhole) indented inward. Suggested height is just under 29-inches in height when panels are added.