Get Adobe Flash player

KEYHOLE GARDEN KITS – ORDER HERE

Now accepting PayPal

You may order the complete kit in regular or mini size, or regular sized frame only. The kits include these major components: Metal Frame, Panels, Interior Cage (read about these below).

Inquiries can be e-mailed to smith@keyholefarm.com. Shipping and sales taxes (Texas shipments) are calculated and added at checkout.

The colors available in each size include: Dark Green, Red Brick, and Light Gray.

Regular Keyhole Garden Kits

$229.00* each

Click on the keyhole images for enlarged view.

Click “add to cart” to place an item in your shopping cart.

We accept PayPal and credit cards.

Light Gray Keyhole Garden Complete Kit Red Brick Keyhole Garden Complete Kit Dark Green Keyhole Garden Complete Kit

Light Gray





Red Brick





Dark Green





NOW AVAILABLE!

Mini-Keyhole Kitchen Garden Kits

Mini-Keyhole Kitchen Garden Kit

$149.00* each

Light Gray





Red Brick





Dark Green





Metal Frame Only (Regular Size)

$75.00* each

(assembly required)





Major Components Consist Of:

Metal Frame

The metal frame is made of EMT conduit, specifically bent into configurations that provide an upper and lower rail separated by vertical posts. The pieces are connected with specially designed PVC tees (provided) that are firmed up with screws (provided). A power screwdriver is needed to drill in these screws through the PVC and end caps and into the metal condui. A rubber mallet, padded hammer, or board is also needed to tap some of the curved pieces into place. In our experiments, it normally took about 20-30 minutes to piece together. This part of the unit can be built indoors and then rolled or carried to the garden location. Nylon ties are included for use in installing panels.

Regular kit: The frame measures approximately six feet in diameter with a wedge (part of the keyhole) indented inward. Suggested height is 29-inches in height when panels are added.

Mini kit: The PVC tees are already mounted on the vertical posts. The frame measures approximately 42 inches in diameter and is a circular shape. Suggested height, when panels are added, is just under 29 inches. According to our calculations, this raised-bed garden kit is ADA compliant.

Panels

Regular kit: There are 12 ridged panels that measure in height 29″ (approx.). Holes in the siding are pre-drilled at factory for use in attaching nylon ties to the metal frame or to adjoining siding panels. The panels slightly overlap as they are assembled, with the ridges running vertically. With two people connecting and securing the panels, it normally takes us about 35 minutes to put together. With one person, it would take slightly longer.

Mini kit: There are six ridged panels that measure just under 29" in height. Holes in the siding are pre-drilled at the manufacturing plant for use in attaching nylon ties to the metal frame or to adjoining siding panels. The panels slightly overlap as they are assembled, with the ridges running vertically.

Interior Cage

Regular kit: Inside the keyhole garden sits a vertical 1 ft. wide (approx.) wire mesh cage that extends several inches above the height of the garden.

Mini kit: Inside the keyhole garden sits a vertical 8" wide (approx.) wire mesh cage (cylinder) that extends several inches above the height of the garden.

Included in the Kits

Regular kit: The kit contains instructions including a planting worksheet, 12 panels for the sides, 12 curved EMT conduit pieces for the frame, four pieces of E-1 tubing, four pieces of E-2 tubing, 10 vertical supports with tees attached, 125 polyester ties and 40 screws (a few extra included), a 3/32” drill bit (for use, if needed, in drilling the screws into the conduit), three wire rings used in making the interior cage, and wire mesh used for the cage.

Mini kit: The kit contains instructions including a planting worksheet, six panels for the sides, 10 curved EMT conduit pieces for the frame, five vertical supports with tees attached, 60 polyester ties and 35 screws (a few extra included), a 3/32” drill bit (for use, if needed, in drilling the screws into the conduit), three wire rings used in making the interior cage, and wire mesh used for the cage.

Tools Needed

Power driver (required), padded mallet (required), level (optional) used when trying to place the garden on level ground, leather or cloth gloves (optional) used while working on the mesh cage, shears or scissors (optional) for cutting the left-over strands of the polyester ties, and a small drill bit (optional) used in helping to screw the curved pieces if needed (a bit is included).

PayPal Acceptance Mark

We currently accept credit card payments that you can make securely through PayPal.

*Prices exclude shipping charges. Shipping will be added to your total at checkout.

If the order is to be shipped outside of the United States, send us an e-mail at smith@keyholefarm.com to have shipping, customs, duties, and taxes calculated since these are not included in the Add to Cart prices.